hot film air flow sensor

V-cone flow meter Suitable to measure dirty fluids Low requirement for straight pipe Wear-proof, high accuracy

V-cone flow meter can be used to measure flow of fluid, two-phase medium (moisture, condensate etc), dirty medium (coke-oven gas, GFG, natural gas, raw oil etc) and so on.

Technical Features:

Low installation requirement: 0 ~ 3D for upperstream and 0 ~ 1D for downstream Turndown ratio: 10:1 Low pressure loss: pressure loss is just 1/3 ~1/5 of that of orifice plate for same   β Abrasion resistance: vacuum will be produced after streamlined cone restriction, avoiding cone from wearing out No block, no adherence: due to the contour of the V-cone not allow for area of stagnation where debris, consensation or particles from the fluid could accumulate Excellent repeatability:  the V-cone primary element exhibits excellent repeatability of + 0.1% Long term stability: β ratio with no change for long term provide high accuracy for long time Signal stability: signal fluctuation is 1/10 of that of orifice plate High accuracy: + 0.5%

Technical Specifications:

Accuracy: ±0.5% Repeatability: ±0.1% Rated Pressure: ≤16MPa, Maximum ≤42MPa Operating Temperature: -40 ~ 700oC Ambient: -40 ~ 65oC Installation Requirement: 0 ~ 3D for upperstream      0~1D for downstream Turndown Ratio: 10:1 Medium: Gas/ Liquid Structure type: Embeded V-Cone Flowmeter/ Braced V-Cone Flowmeter/ Inserted V-Cone Flowmeter Material: Kinds of metal Flange Standard: As required

hot film air flow sensor