Anjun Steam Flow Meter Gas Flow Meter Steam Gas with CE mark

Steam Flow Meter Natural Gas Flow Meter Suitable to measure dirty fluids Low requirement for straight pipe

Anjun Steam Flow Meter Gas Flow Meter Steam Gas with CE mark

V-cone flow meter can be used to measure flow of fluid, two-phase medium (moisture, condensate etc), dirty medium (coke-oven gas, GFG, natural gas, raw oil etc) and so on.

Technical Features:

Low installation requirement: 0 ~ 3D for upperstream and 0 ~ 1D for downstreamTurndown ratio: 10:1Low pressure loss: pressure loss is just 1/3 ~1/5 of that of orifice plate for same   βAbrasion resistance: vacuum will be produced after streamlined cone restriction, avoiding cone from wearing outNo block, no adherence: due to the contour of the V-cone not allow for area of stagnation where debris, consensation or particles from the fluid could accumulateExcellent repeatability:  the V-cone primary element exhibits excellent repeatability of + 0.1%Long term stability: β ratio with no change for long term provide high accuracy for long timeSignal stability: signal fluctuation is 1/10 of that of orifice plateHigh accuracy: + 0.5%

Technical Specifications:

Accuracy: ±0.5%Repeatability: ±0.1%Rated Pressure: ≤16MPa, Maximum ≤42MPaOperating Temperature: -40 ~ 700oCAmbient: -40 ~ 65oCInstallation Requirement: 0 ~ 3D for upperstream      0~1D for downstreamTurndown Ratio: 10:1Medium: Gas/ LiquidStructure type: Embeded V-Cone Flowmeter/ Braced V-Cone Flowmeter/ Inserted V-Cone FlowmeterMaterial: Kinds of metalFlange Standard: As required

Anjun Steam Flow Meter Gas Flow Meter Steam Gas with CE mark